FN271F cotton wool spinning macihnery is applicable to open, card and blend chemical fibers and mixed fibers, condense them into wool tops of certain specifications, and then coil them into sliver can regularly for the following process.
Features: 1, feed-based metal parts, hardware detection and cotton debris layer thickness from the stop to protect the machine safety.
2, with the speed of roller stop device is too low to prevent the occurrence of blocking cars.
3, with the top off device shall stop.
4, has a suction device to draw air flying machine short fiber wool to prevent traffic congestion, lower frequency.
5, enter the gross floor Autoleveller system by the automatic adjustment in order to ensure the stability of uniform tops.
6, three workers and a Four-cylinder automatic for loop can be further reduced the labor intensity of workers.
7, electrical control cabinet installed on the machine in front of the rack, touch-screen machines installed in the casing on the left side of the front, easy to operate, increasing the work space.
8, automatic control of a programmable logic controller and touch screen communication, through the touch screen to set up and modify the process parameters and the right time to observe the operation of moving parts and the emergence of state failure, employing dialogue machine programmable logic controller control the frequency converter so that a more stable, thus ensuring the normal operation of the machine.
9, the whole casing closed safety, appearance neat and beautiful.
|cotton wool spinning macihnery width||1200mm, 1500mm||Licker-in speed||600 RPM(frequency control)|
|Applicable material||Chemical fiber and its blendings, with the length 25-127mm and the finess 0.8-30D||Doffer working dia.||Φ650mm|
|Feeding form||Double-box volumetric type automatic continuous feeding with photoelectric control||Doffer speed||10-75RPM (frequency control)|
|Delivery tops weight||7-20g/m||Coil type||Manual type 3-position or 4-position automatic can changer|
|Total draft multiple||32-140||Applicable sliver can specification||Φ600*900mm, 400*1100mm|
|Max. delivery speed||200m/min||Total power||12kw|
|Max. productive capacity||240kg/h per set||Floor face||Width1.2 11000*2290|
|Width 1.5 11000*2590|
|Cylinder working dia.||770mΦmm||Machine weight(L*W)||11000kg|
|Cylinder speed||400 RPM(frequency control)||Consumption for dust suction(continuous)||2200m 3 /h per set|
|Licker-in working dia.||Φ250mm|| || |